TST Control Panels

All limit types are covered, mechanical limits, most variations of encoder/electronic limits are compatible. Any that are not covered we have the TST PD2 available to retrofit.

No, FEIG TST controllers are configurable for practically any application. The TST WU is compatible with either 1ph or 3ph motor allowing extensive door control functions. The TST inverter range from 0.75Kw 1ph through 5Kw 3ph can be used for both door and gate applications. FEIG also have the dedicated TST FUZ2-B controls commonly used on gate and barriers installs.

No, FEIG are active in several markets, Controllers for gate and barriers, Sensors such as loop detectors, Identification for access control, RFID and barcode systems, Payment / payment terminals.

Yes, as the sole agent for FEIG in the UK & Ireland for over 25 years, Marantec UK through their strong working partnership with FEIG can supply relevant products as required along with full sales and technical support.

Of course, for any product supplied by Marantec UK we offer full training and support for that product. REMEMBER, all our training is free.

Yes, Marantec UK have worked with FEIG to provide default profiles for most applications along with simple to follow instructions to speed the initial set up. We provide full technical support from the outset, all along with full FEIG manuals if required.

FEIG controls accept many accessories most commonly, loop detectors of up to four channel, the additional SURA6 safety edge card allowing for a further six individual safety edges to be connected, COMMS boards allowing interlocking, air locking and master/slave functions. Further expansion boards with extra relay outputs are also available. Not forgetting radio cards and compatible transmitters are also available.

Common connections are pre-programmed, along with auto-detection of the main safety edge. Accessories can be enabled or disabled via the programming interface as required.

No, all programming is via the panel mounted buttons and confirmed on the integrated display. The display is easily visible through the control panel window.

Press and hold the stop and open button together for 2 seconds, the display will change to show the programming mode.

No, select the relevant profile when first powering the controller. For example, setting P.991 to 1 will select a standard motor fitted with digital limits as shown in the manual supplied with the controller.

The display will indicate if the door is open or closed, the countdown for autoclose along with various status messages. Status messages are organised with a letter prefix, E.xxx indicating an active input, I.xxx indicates information messages and F.xxx reporting any faults.

Using the supplied manual, fault codes can be identified. For example, any F.3xx will refer to connected safety edges. The full code can be used to identify the exact nature of the fault, such as F.363 indicating the main safety edge is open circuit (e.g., broken cable).

Once the fault has been identified and rectified, simply pressing all three buttons on the front of the controller for more than 2 seconds clears the fault. If the fault has been rectified the display will return to show its default status.

All FEIG controllers can be used in these scenarios. Most common for this type of application, gates and barriers, is the TST FUZ2-B fitted with the COMMS board for motors up to 0.75Kw in size.

Yes, the controls can be supplied in standard steel housings, stainless steel and or housings to suit hygienically sensitive areas (e.g. food industry).

Yes, Marantec UK have been providing custom build solution since 1990.